Cannon Error Code Long 3 Short 1 Morse Code — — —•
Fault: Room fan (circulation fan) pressure signal has been interrupted.
Applies to: Cannon Fitzroy / Canterbury Inbuilt and Cannon Fitzroy FITZIB-PMEXx Units.
There is a green and red LED on the ignition controller. These LEDs act as diagnostic aids when the heater safety systems produce a safe shutdown condition. Green LED: this is on when the flame is sensed at the flame sensor electrode. Red LED: this flashes according to the fault code. No LEDs means there is no power to the ignition module. Check that the heater switch is set to ON by pressing the ON/OFF button.
SKU: 428-2-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-2-2-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1Category: CannonTag: water error