Fault: Hardware failure on Combustion fan drive, or microcontrollers disagree
Applies to: Kemlan Power Flue Horizon Gas Fireplaces
The ignition unit is polarity sensitive. If the active and neutral cables are not wired correctly, the unit will not sense a flame, the green LED will not come on. The heater will light but will turn off almost immediately as a result. If the heater lights but the igniter keeps sparking then the unit shuts down after 3 to 5 seconds, incorrect polarity is a likely cause. The fault code on the module red LED will be 2 long and 1 short. Before carrying out repairs, turn off the power, visually inspect all cables and connections for damage or corrosion.
SKU: 428-2-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-2-2-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1Category: KemlanTag: water error