Error Code h01 58: Pressure Switch Fail. During the heating cycle after the combustion chamber pressure switch has opened indicating a pressure loss with the maximum times this is allowed exceeded.
Brivis Error Code 58
Need help with your Brivis System?
Brivis Fault Code 58
Brivis Error Code 58 Pressure Switch Fail: During the heating cycle after the combustion chamber pressure switch has opened indicating a pressure loss with the maximum times this is allowed exceeded.
For Heater Repair Tech Only
Reason: During the “ON” phase of the heating cycle after the “FLUEDELAY” state has been processed the pressure switch has opened indicating a pressure loss (Error 48) 5 consecutive times. The heating cycle will be forced to its “OFF” state with no restart. A restart will only occur from a manual reset including a power reset. Service Check List: Check that the condensate drain has a continual fall away from the heater and does not contain water. Check that the condensate pipe length is correct length. Refer to Check List for Error Code 48.
