Brivis Error Code 52

Error Code h01 52: Flame No Gas: With no gas being expelled and no ignition source active a flame signal has been detected indicating a problem with the flame sensing circuitry.

Brivis Fault Code 52

Brivis Error Code 52 Flame No Gas: With no gas being expelled and no ignition source active a flame signal has been detected indicating a problem with the flame sensing circuitry.

For Heater Repair Tech Only

Reason: This error indicates that the burner flame has been detected by the flame sensor when the gas valve is not energised, and flame is not expected. Service Check List: • Check the pilot burner and/or burner main flame sensor lead is not shorted to Earth. • Check if the burner flame is present with the unit turned OFF. • Check the gas valve is not jammed open due to malfunction, obstruction or blockage. • Check if the 24 Volt power supply to the valve has been turned OFF, as expected in the normal operation.

SKU: 326 Category: Tags: ,